Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
Fine screening on a high frequency deck needs the cloth to stay taut in both directions, otherwise the apertures open up at the centre and the cut point wanders. A bow shaped cross tension cloth solves this by curving the panel across the deck and tensioning it along both axes, so the urethane surface behaves like a drum skin rather than a flat sheet.
The cloth is normally specified for cuts between 0.5 mm and 3 mm in mineral processing, coal slurry classification, tailings recovery and fine sand grading. Slotted apertures down to 0.1 mm are available for dewatering duties where a square opening would blind. Because the panel is urethane rather than wire, the deck runs noticeably quieter and generates far less airborne dust at the discharge.
| Shape | Aperture (mm) | Common Sizes (mm) | Thickness (mm) |
|---|---|---|---|
| Square | 3 - 200 | 3, 5, 10, 20, 30, 50, 100, 200 | 20 - 55 |
| Round | 3 - 160 | 3, 6, 10, 25, 50, 100, 160 | 20 - 55 |
| Round (iron mould) | 40 - 150 | 40, 50, 65, 80, 100, 150 | 48 - 55 |
| Slotted | 3x12 - 40x70 | 3x12, 4x14, 13x19, 20x30, 30x45 | 8 - 39 |
| Flip flow | 3.5 - 15 | 3.5, 5, 10, 12, 15 | 6 - 40 |
Other apertures, shapes, thicknesses and panel dimensions are produced to order.
Cross tension decks use the original clamping rails, so the bow height and hook angle are matched to your machine before moulding. Common size ranges run to 3950 mm length and 2000 mm width. Sampling is possible for new circuits, and our team can advise on aperture versus throughput before you commit to a full set.