Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
Gypsum is soft, damp and adhesive, and it does something most materials do not: it sets. Material that sits on a deck surface starts to harden, and scale that builds on a panel face reduces open area day by day until the deck is doing no work at all. On FGD gypsum from a flue gas desulphurisation plant, the feed arrives at 8–12 % moisture with a slightly acidic liquor, which makes both the adhesion and the chemical side of the problem worse.
A surface that releases rather than holds. Polyurethane releases damp, setting material more readily than steel or rubber, and the tapered aperture means any fragment that does break loose has a clear path through instead of sitting in the hole. Together these slow the scale build-up that otherwise drives weekly cleaning.
Unaffected by acidic liquor. FGD liquor runs mildly acidic and attacks steel media continuously. The compound here is a hydrolysis-resistant wear grade, so the panel does not soften, swell or lose its moulded aperture in wet, acidic service.
No rust in a product sold on whiteness. Gypsum going to board manufacture is sold on purity and brightness. Steel media rusts and stains; a moulded polyurethane panel has no metal in the wear surface to shed or to discolour the product.
Fine cut points held through the campaign. Board-grade gypsum is graded narrowly, and a slot that wears open shifts the gradation, which shows up in board properties rather than on the screen. A moulded slot keeps its dimension.
Where it runs
Natural gypsum crushing and sizing, FGD gypsum dewatering and classification, gypsum board feed preparation, and plaster and gypsum byproduct screening at power stations and chemical plants.
Technical data
| Item | Specification |
|---|---|
| Thickness | 40 mm standard; 25–60 mm on request |
| Panel size | Custom cut to your deck drawing |
| Aperture | 3–100 mm, slotted or square; tapered option |
| Hardness | Shore A 85 (75–95 available) |
| Compound | Hydrolysis-resistant wear grade polyurethane |
| Density | 1.10–1.15 g/cm³ |
| Tensile strength | ≥ 30 MPa |
| Tear strength | ≥ 80 kN/m |
| Abrasion (DIN 53516) | ≤ 40 mm³ |
| Rebound resilience | ≥ 40 % |
| Service temperature | −30 °C to +80 °C |
| Fixing | Pin and sleeve, bolt-through, or rail clamp |
Ordering
Send gypsum type, moisture at the deck, cut point, pH if it is FGD material, and how often the deck is currently cleaned. Cleaning frequency is the number we are trying to reduce, so tell us where you are now.