Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
On a food or ingredient line, the screening media is a food contact surface and a contamination risk at the same time. Woven wire sheds broken strands into product. Mild steel rusts and stains. Coatings chip. Every one of those is a metal-detector trip, a rejected batch, or a traceability exercise that nobody has time for.
No wire to shed into the product. The aperture is moulded through the panel, so there is no strand to break and nothing metallic in the wear surface. For plants running metal detection or a HACCP plan around foreign body control, this removes a failure mode rather than managing it.
Does not rust or stain. Salt, sugar and wet grain are aggressive to steel media. Polyurethane is unaffected, and there is no coating to chip off into product over time.
Gentle on friable product. Sugar crystals, flaked salt and extruded product break on impact against a rigid deck, and every fracture is product downgraded to a fraction that sells for less. An elastic surface with rebound resilience at or above 40 % returns part of that contact energy, so more of the product leaves the screen in the fraction it was made in.
Cleanable surface. The panel face is smooth and non-porous, so it washes down without holding product in the structure. On lines that change product or allergen between runs, cleaning verification is far simpler than with wire or perforated plate.
Food-contact grades available. Tell us the product and the market you supply. Food-contact compliant compounds are available on request, and we will confirm the relevant compliance documentation before we quote rather than assume your requirement.
Grain cleaning and grading, sugar and salt screening and sizing, flour and starch sifting lines, spice and ingredient classification, and food-grade salt and mineral processing.
| Item | Specification |
|---|---|
| Thickness | 40 mm standard; 25–60 mm on request |
| Panel size | Custom cut to your deck drawing |
| Aperture | 3–100 mm, slotted or square; tapered option |
| Hardness | Shore A 85 (75–95 available) |
| Compound | Hydrolysis-resistant wear grade polyurethane |
| Density | 1.10–1.15 g/cm³ |
| Tensile strength | ≥ 30 MPa |
| Tear strength | ≥ 80 kN/m |
| Abrasion (DIN 53516) | ≤ 40 mm³ |
| Rebound resilience | ≥ 40 % |
| Service temperature | −30 °C to +80 °C |
| Fixing | Pin and sleeve, bolt-through, or rail clamp |
Send product, cut point, throughput, cleaning method and the compliance standard you need to meet. Compliance is the first thing we check — if your market requires documentation we cannot provide, we will tell you before you order.