Tensioned Polyurethane Screen Panel Pin And Sleeve PU Screen

Place of Origin: Chengdu, China
Brand Name: Zhicheng Screen
Certification: ISO 9001:2015
Model Number: ZC-PU-TENSION
Minimum Order Quantity: 10 Pieces
Price: USD 25-50 / Piece
Packaging Details: Export-grade wooden pallet with stretch film and shock-proof foam
Delivery Time: 7-15 days for stock, 20-30 days for production
Payment Terms: L/C,T/T
Supply Ability: 5000 Pieces per Month
Inquiry Now
Get A Quote
Specifications
Highlight Features

Tensioned Polyurethane Screen Panel

,

Pin And Sleeve Polyurethane Screen

,

Pin And Sleeve PU Screen

Material:
Imported High Wear-Resistant Polyurethane
Type:
Tensioned / Bow-shaped Screen
Aperture Range:
2mm - 180mm
Max Length:
3950mm
Max Width:
2000mm
Thickness:
Determined By Sieve Hole
Mounting:
Tensioned Bow-shaped
Application:
Coal Washing, Mineral Processing, Dewatering
Product Description

Tensioned Polyurethane Screen Panel for Fast, Repeatable Deck Changes

A tensioned deck is judged on two things: how long a panel change takes, and whether the panel is still tight a month later. Most tensioned media fail the second test. The fixing creeps, tension drops, the panel drums on the frame and the deck starts leaking oversize — and by the time anyone notices, the damage is already in the product.

This panel is built around the fixing, not around the aperture.

Pin and sleeve fixing, no frame modification. The pin seats into a moulded sleeve that carries load through the panel body rather than through a bolt hole. Nothing is drilled into your deck frame, so the panel drops onto the existing fixing points and comes off the same way. A deck set up for rubber or steel media can be converted without re-machining the frame.

Tension distributed, not concentrated. A panel held at four corner bolts pulls tight at the corners and stays slack in the middle, which is where it drums first. The sleeve arrangement loads the panel along its full length, so the working surface stays in contact with the frame across the whole span.

One fitter, no crane. A 40 mm panel is heavy enough to need two people to carry it across a walkway. The pin-and-sleeve layout lets one fitter lift, locate and seat a panel from above the deck, which is what determines real change-out time on a plant running three shifts.

Wears at the surface, not at the fixing. Reinforcement sits around the fixing zone so abrasive slurry attacks the panel face instead of eating the sleeve. That is the difference between a panel retired for worn apertures and one retired because it will no longer stay fixed.

Where it runs

Coal preparation and washing decks, sand and gravel wash plants, dewatering and drain sections, quarry sizing screens and mobile plant decks — any deck that already uses a tensioned fixing pattern, or is being converted from rubber or wire where frame modification is not an option.

Technical data

Item

Specification

Thickness

40 mm standard; 25–60 mm on request

Panel size

Custom cut to your deck drawing

Aperture

3–100 mm, slotted or square; tapered option

Hardness

Shore A 85 (75–95 available)

Compound

Hydrolysis-resistant wear grade polyurethane

Density

1.10–1.15 g/cm³

Tensile strength

≥ 30 MPa

Tear strength

≥ 80 kN/m

Abrasion (DIN 53516)

≤ 40 mm³

Rebound resilience

≥ 40 %

Service temperature

−30 °C to +80 °C

Fixing

Pin and sleeve, bolt-through, or rail clamp

Ordering

Send the deck drawing or a measurement sheet with fixing centres, panel count per deck, screen motion and cut point. We return a dimensioned drawing with the fixing positions marked for your approval before production.

FAQ

What is your MOQ and lead time? MOQ is 10 pcs. Standard lead time is 15 days, and standard mold making takes 10 days.

Will the panel fit a frame that currently takes rubber? Usually yes. Send the fixing centres and the panel outline; the pin positions are moulded to match your existing frame rather than to a standard pattern.

How much tension drop should I expect over a campaign? With the sleeve taking the load instead of a bolt hole, tension stays stable until the panel face itself wears through. If a panel drums early, the cause is normally a worn pin, not the panel — check the pins at every change-out.

Related Products
Send an Inquiry