Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
Sand and Gravel Screen Panel in Polyurethane for Wet Wash Plants
A sand and gravel wash plant lives on throughput per hour, and the thing that takes throughput away is not wear — it is blinding. Wet sand with a clay fraction sits on the deck, bridges the apertures and turns a 200 tph screen into a 120 tph screen without anyone touching a setting.
Slots that release instead of grip. The aperture is tapered through the panel thickness, so a near-size particle that enters at the top face is not held at the bottom. Combined with the flex of a 25–40 mm polyurethane section under vibration, near-size sand releases on the return stroke rather than building a layer across the deck.
Open area sized for the cut, not for the catalogue. On a wash deck the right aperture is the one that holds your specification without blinding. We size the slot against your product gradation and the clay content of the feed, rather than supplying one standard slot for every plant.
Lighter panels, faster change-out. A wash plant deck is usually changed by hand from a walkway, often at night, often by one fitter. Polyurethane at 25–30 mm in the middle and discharge sections is light enough to handle alone, and the pin and sleeve fixing means the panel locates without tools beyond a mallet.
Runs wet without swelling or hydrolysing. Constant water exposure is what kills generic elastomer panels. The compound is a hydrolysis-resistant wear grade, so the panel does not soften, swell or lose its moulded aperture over a season of continuous wet duty.
Where it runs
Wet sand and gravel classification, washing and sizing decks, dewatering and stockpile drain sections, and mobile wash plants handling high-clay feed. It suits plants where blinding, not breakage, is the reason panels come off the deck.
Technical data
|
Item |
Specification |
|
Thickness |
40 mm standard; 25–60 mm on request |
|
Panel size |
Custom cut to your deck drawing |
|
Aperture |
3–180 mm, slotted or square; tapered option |
|
Hardness |
Shore A 85 (75–95 available) |
|
Compound |
Hydrolysis-resistant wear grade polyurethane |
|
Density |
1.10–1.15 g/cm³ |
|
Tensile strength |
≥ 30 MPa |
|
Tear strength |
≥ 80 kN/m |
|
Abrasion (DIN 53516) |
≤ 40 mm³ |
|
Rebound resilience |
≥ 40 % |
|
Service temperature |
−30 °C to +80 °C |
|
Fixing |
Pin and sleeve, bolt-through, or rail clamp |
Ordering
Send deck dimensions, panel count, screen motion, feed gradation and the clay content you are dealing with. We return a dimensioned drawing with the aperture layout marked, and suggest a thickness split by deck position.
FAQ
What is your MOQ and lead time?
MOQ is 10 pcs. Standard lead time is 15 days, and standard mold making takes 10 days.
My deck blinds in summer when the feed is wetter. Will this fix it?
Usually it improves sharply, because the gain comes from slot geometry and panel flex rather than from the aperture being larger. If the clay is heavy, ask us about a deck layout with a coarser aperture at the feed end.
Can I run different apertures on the same deck?
Yes, and it is common practice. A coarser slot at the feed end drops the water and the fines early, which leaves the finer apertures downstream working on a thinner bed.