Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
In battery mineral processing, the screen is not a sizing device so much as a value device. Flake graphite is sold on flake size distribution, and a deck that fractures large flakes into small ones destroys product value on every pass. Spodumene concentrate is graded narrowly, and a slot that drifts out of tolerance puts a shipment out of specification.
Protecting flake, not just cutting size. Large graphite flakes are thin, brittle and easily broken by impact against a rigid deck. A polyurethane surface absorbs and returns the contact energy instead of fracturing the particle, which is why flake preservation is the reason plants move away from steel media on this duty.
Fine cut points held for the campaign. Concentrate specifications are tight, and a moulded slot holds its dimension through months of abrasive duty in a way a cut or punched aperture does not. That stability is what keeps a product on specification between surveys.
Wet abrasive duty without hydrolysis. Flotation circuit feed and concentrate streams are wet, sometimes warm and sometimes at a pH that attacks metal media. The compound is a hydrolysis-resistant wear grade, so the panel does not soften, swell or lose its aperture over continuous wet service.
Tailings and water recovery sections. The same deck family handles the tailings side, where fine slots and panel flex keep the surface open at cut points where slurry would otherwise blind a rigid panel.
Where it runsSpodumene and lepidolite crushing, screening and concentrate sizing; flake graphite rougher and cleaner circuit screens; lithium and graphite tailings dewatering; and fine classification ahead of thickening or filtration.
Technical data| Item | Specification |
|---|---|
| Thickness | 40 mm standard; 25–60 mm on request |
| Panel size | Custom cut to your deck drawing |
| Aperture | 3–100 mm, slotted or square; tapered option |
| Hardness | Shore A 85 (75–95 available) |
| Compound | Hydrolysis-resistant wear grade polyurethane |
| Density | 1.10–1.15 g/cm³ |
| Tensile strength | ≥ 30 MPa |
| Tear strength | ≥ 80 kN/m |
| Abrasion (DIN 53516) | ≤ 40 mm³ |
| Rebound resilience | ≥ 40 % |
| Service temperature | −30 °C to +80 °C |
| Fixing | Pin and sleeve, bolt-through, or rail clamp |
Send mineral type, circuit position, cut point, pulp density and screen motion. For graphite, tell us the flake size you are protecting — it determines section thickness and slot layout more than tonnage does.