Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
Fertilizer is the awkward material on a screen deck. It is hygroscopic, so it picks up moisture from the air and starts to cake. It is relatively soft, so a hard deck fractures granules and makes dust that was saleable product a shift earlier. And it is chemically aggressive enough to eat mild steel and woven wire in a season.
Caked material releases instead of building. The tapered aperture opens through the panel thickness, so soft agglomerates that form on the surface break up and pass rather than bridging the hole. Combined with the flex of the panel under vibration, this is what keeps the deck running through a humid shift rather than requiring a wash-down every few hours.
Cushioned contact protects the granule. A rigid deck impacts each granule hard enough to chip it. An elastic polyurethane surface with rebound resilience at or above 40 % returns part of that energy, so fewer granules fracture and the dust fraction leaving the screen is smaller. On a bagged product sold by grade, that difference is measurable at the weighbridge.
No corrosion, no rust staining. Fertilizer salts attack steel media and stain product with rust. Polyurethane is unaffected by the salt load, and there is no coating to chip off into the product.
Handles the acidic end of the range. Urea, phosphate and blended products cover a wide pH range. The compound is specified as a hydrolysis-resistant wear grade, and we will confirm suitability against your product chemistry before quoting rather than after.
NPK granulation and blending plants, urea and ammonium product sizing, phosphate rock screening, bagged and bulk product scalping, and reclaim screens at blending and dispatch facilities.
| Item | Specification |
|---|---|
| Thickness | 40 mm standard; 25–60 mm on request |
| Panel size | Custom cut to your deck drawing |
| Aperture | 3–100 mm, slotted or square; tapered option |
| Hardness | Shore A 85 (75–95 available) |
| Compound | Hydrolysis-resistant wear grade polyurethane |
| Density | 1.10–1.15 g/cm³ |
| Tensile strength | ≥ 30 MPa |
| Tear strength | ≥ 80 kN/m |
| Abrasion (DIN 53516) | ≤ 40 mm³ |
| Rebound resilience | ≥ 40 % |
| Service temperature | −30 °C to +80 °C |
| Fixing | Pin and sleeve, bolt-through, or rail clamp |
Send product type, granule size distribution, cut point, moisture at the screen and whether the duty is hot from the dryer. Product chemistry matters here — tell us what you are screening and we will confirm compound suitability before production.