Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
A terminal screen does not get a maintenance window. It runs when a ship is being loaded, and the only time it stops is when there is no vessel at the berth — which is exactly when nobody wants to spend the day changing panels. Every other consideration on a terminal deck follows from that: media that needs frequent attention loses more tonnage than media that wears out.
Continuous duty without re-tensioning. Wire cloth and bolted rubber both need periodic attention, and on a terminal that attention competes with shipping schedules. Pin and sleeve fixing holds the panel seated under continuous vibration, so re-tensioning comes off the list.
Salt air does not attack the panel. Coastal stockyards run in salt-laden air that corrodes steel media and the frame beneath it. Polyurethane is unaffected by salt spray, and a sealed edge keeps slurry and salt water out of the frame rather than feeding corrosion underneath.
Change-out sized to the window that exists. When a berth does open up, the question is how much deck can be changed before the next vessel. Pin and sleeve fixing means panels lift out and seat from above without bolting, so a crew can work down a deck in the time available rather than in the time the job takes.
Wear life matched to throughput, not to calendar. Terminal screens are often rated by tonnes handled rather than by hours. Send the annual tonnage and the bed depth, and we will size the section and the compound so a campaign matches your planned outage cycle.
Where it runsCoal and iron ore export and import terminals, stockyard reclaim screens, shiploader feed screens, port-side crushing and screening plants, and bulk handling facilities running continuous shifts.
Technical data| Item | Specification |
|---|---|
| Thickness | 40 mm standard; 25–60 mm on request |
| Panel size | Custom cut to your deck drawing |
| Aperture | 3–100 mm, slotted or square; tapered option |
| Hardness | Shore A 85 (75–95 available) |
| Compound | Hydrolysis-resistant wear grade polyurethane |
| Density | 1.10–1.15 g/cm³ |
| Tensile strength | ≥ 30 MPa |
| Tear strength | ≥ 80 kN/m |
| Abrasion (DIN 53516) | ≤ 40 mm³ |
| Rebound resilience | ≥ 40 % |
| Service temperature | −30 °C to +80 °C |
| Fixing | Pin and sleeve, bolt-through, or rail clamp |
Send deck layout, fixing centres, commodity, tonnage per annum and the outage windows you actually get. For terminals we also ask about the environment — coastal salt exposure changes how we seal and specify the panel edges.