Mineral Slurry Classification 60m3/H Hydrocyclones 380mm Desanding Hydrocyclone

Place of Origin: Chengdu, China
Certification: ISO 9001, ISO 14001, ISO 45001
Model Number: HC-PU-380
Minimum Order Quantity: 1 Set
Packaging Details: Export-grade wooden case, liner and vortex finder braced inside the shell, accessories in a separate carton
Delivery Time: 10-18 days for stock, 25-35 days for production
Payment Terms: T/T,L/C,PayPal,Western Union
Supply Ability: 200 Sets per Month
Inquiry Now
Get A Quote
Specifications
Highlight Features

Mineral Slurry Classification 60m3/H Hydrocyclones

,

380mm Desanding Hydrocyclone

,

60m3/H 380mm Desanding Hydrocyclone

Cone Diameter:
380 Mm (15 Inch)
Feed Head:
Replaceable PU, Tangential Inlet
Nominal Feed Capacity:
50 - 75 M3/h At 0.12 MPa
Apex Spigot Range:
40 / 50 / 65 Mm Replaceable
Vortex Finder Range:
100 / 115 / 130 Mm Replaceable
Body Weight:
96 Kg Assembled
Installation:
Bolt-on Flange, Cluster Manifold Or Single Mount
Wearing Parts:
Apex Spigot, Vortex Finder, One-piece Liner, Feed Chamber, Gaskets
Product Description

380mm Hydrocyclone for Mineral Slurry Classification

380mm Hydrocyclone Stable Cut Point PU Liner Mineral Slurry Classification 60 m3/h

In a closed grinding circuit the cyclone is the control valve of the whole mill. If the cut point wanders, the mill either over-grinds or sends coarse material forward. This 380 mm classifier is designed around one objective: holding the same separation curve from the first shift to the last.

Why the Cut Point Stays Where It Is Set

  • One-piece PU liner keeps the cone profile dimensionally true, so the internal geometry that defines the cut does not erode into a different shape over time.
  • Matched apex and vortex finder seats hold concentricity; an off-centre apex is the most common cause of a shifting cut in service.
  • Rigid steel shell resists the deformation that changes inlet area under pressure.
  • Replaceable wear parts are simply swapped back to the original specification instead of being rebuilt by hand.

How Stable Classification Is Held in Service

Three things normally move a cut point: liner wear, apex wear and pressure variation. The polyurethane liner wears uniformly rather than tracking a groove, the PU apex keeps its bore round, and a fixed inlet area keeps the pressure-to-flow relationship predictable. Together they let the operator treat the cyclone as a fixed unit in the circuit rather than a variable to be chased.

Hydrolysis and Corrosion in Wet Circuits

Classification circuits run continuously in process water, often with reagents and chlorides present. Polyurethane is not attacked by water in the way steel is, and the liner maintains its mechanical properties in pH 2 - 13 slurries, so the wear surface is not the weak point in aggressive service.

Installed as a Complete Unit

Each cyclone ships assembled with liner, apex, vortex finder and gaskets fitted, plus a spares kit if required. Lightweight construction and bolt-on flanges mean the plant crew can replace a unit without lifting equipment. Production is carried out under ISO 9001, ISO 14001 and ISO 45001 certified systems.

Technical Parameters

Liner Type One-piece hot cast polyurethane (PU) liner
Liner Hardness 88 - 92 Shore A
Housing Material Carbon steel with anti-corrosion coating, SS304 optional
Feed Pressure 0.06 - 0.25 MPa
Separation Range 10 - 150 µm
Classification Efficiency ≥ 85%
Underflow Spigot Replaceable PU spigot, ceramic option
Overflow Vortex Finder Replaceable PU vortex finder
Hydrolysis Resistance ≥ 85% tensile retention after 168 h immersion at 70 ℃
Corrosion Resistance pH 2 - 13 slurry with chloride bearing water
Process Connection Bolt-on flange / quick clamp, DN50 - DN200
Spare Parts Kit Apex spigot, vortex finder, inner liner, feed chamber, gaskets

Recommended Duty Range

Ball mill closed circuit classification, copper and lead-zinc slurry, iron ore desliming and industrial mineral sizing where a repeatable d50 is required.

Share your slurry density, solids and target d50 and we will specify apex and vortex finder sizes for your circuit.

Related Products
Send an Inquiry