Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
Slurry Treatment Screen Panel in Polyurethane for Dredging and Wash Water
A slurry treatment plant is a water business, not a solids business. The objective is to get clean water back to the process and dry-ish solids into a skip, and the screen deck is where that separation either happens or does not. When the deck blinds, the whole plant recirculates mud and the water has to be topped up from mains.
Screening the coarse fraction before it reaches the cyclones. A coarse screen ahead of the cyclone bank takes out the fraction that would otherwise wear the cones and block the apexes. Panels at 3–10 mm do that work with a large open area and a low pressure drop.
Tapered slots for fibrous and sticky solids. Slurry treatment feed is not clean aggregate — it carries organics, fibre and clay. Those are exactly the materials that bridge a straight slot. A tapered slot and a flexible panel release them, which is what keeps the deck from being hosed down every few hours.
Designed for wash-down duty. These decks are cleaned with a water jet, often daily. Panels are fixed from above with pin and sleeve or bolt-through fixing, so they can be lifted, hosed and reseated without dismantling the frame.
Corrosion-resistant construction. Slurry treatment water is often aggressive — brackish, alkaline or contaminated with bentonite. The compound is hydrolysis resistant and the frame is encapsulated, so the deck does not degrade from the water it is handling. On a plant recirculating the same water for weeks, that resistance is what keeps the aperture stable.
Where it runs
Dredging spoil separation, TBM and diaphragm wall slurry plants, vehicle wash water recycling, concrete washout recovery and municipal grit removal.
Technical data
|
Item |
Specification |
|
Thickness |
40 mm standard; 25–60 mm on request |
|
Panel size |
Custom cut to your deck drawing |
|
Aperture |
3–100 mm, slotted or square; tapered option |
|
Hardness |
Shore A 85 (75–95 available) |
|
Compound |
Hydrolysis-resistant wear grade polyurethane |
|
Density |
1.10–1.15 g/cm³ |
|
Tensile strength |
≥ 30 MPa |
|
Tear strength |
≥ 80 kN/m |
|
Abrasion (DIN 53516) |
≤ 40 mm³ |
|
Rebound resilience |
≥ 40 % |
|
Service temperature |
−30 °C to +80 °C |
|
Fixing |
Pin and sleeve, bolt-through, or rail clamp |
Ordering
Send feed solids content, maximum particle size, target separation, water chemistry if it is unusual, and deck drawing. Bentonite and polymer-treated slurries behave differently on a deck, so tell us if either is in the circuit.