Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
This polyurethane sand washing sheet is specified where sticky clay-bound sand clings to steel troughs and chutes. The 95 Shore A cast polyurethane surface has a very low friction coefficient and a non-porous skin, so wet sand slides off instead of smearing onto the liner.
The smooth cast skin will not absorb water or hold clay film, so material releases cleanly and the trough stays at its full flow section through the shift.
Reduced drag between sand slurry and liner keeps the conveyor or pump load steady, which shows up as a lower and more stable amp reading on the drive.
A 95 Shore A hardness gives good cut and abrasion resistance while staying flexible enough to bend into radius corners without stress cracking.
| Sheet Thickness | 8 / 10 / 12 / 15 mm |
| Hardness | 95 Shore A |
| Water Absorption | Below 1 percent, 24 h immersion |
| Fixing Method | Adhesive, bolt or clamp strip |
| Sheet Size | Customised to drawing |
| Working Temperature | -30 to 80 deg C |
Sheets are cast in steel moulds and can be supplied with a lightly textured backing for adhesive bonding, or with pre-drilled fixing holes for mechanical mounting. Both options are produced on the same line, so you can mix adhesive and bolt fixing on one machine.
Contact us with your drawing, sample or working condition. We will confirm sheet size, thickness, hardness and fixing method, then quote factory-direct wholesale pricing within 24 hours.