Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
Silica sand is sold on chemistry as much as on gradation. A few parts per million of iron picked up downstream can move a batch out of glass-grade and into foundry-grade, and the difference in price is not small. Every component the product touches is therefore suspect, and the screen deck is one of the last things it touches.
No exposed metal in the product path. Panels are moulded in polyurethane with any structural element fully encapsulated, so there is nothing for abrasive silica to wear against in the contact zone. Steel mesh and punched plate both shed material into the product here; polyurethane does not.
Slot held tight over a long campaign. Silica is highly abrasive, and what it attacks first is the land between slots. A compound at ≤40 mm³ DIN abrasion keeps that land intact, so the slot dimension at the end of the run is still the dimension you specified.
Two adjacencies matter: iron and staining. Beyond measurable contamination, there is the visible problem of rust staining on a white product when a deck stands wet between campaigns. An encapsulated panel avoids that as well.
Washing at fine apertures without blinding. Glass and foundry sands separate at fine cuts, where surface tension starts to dominate. The tapered slot profile is what keeps drainage stable at those sizes rather than letting the deck seal progressively through a shift.
Silica and quartz sand washing lines, glass sand production, foundry sand preparation, frac sand washing and filtration-grade silica finishing.
| Item | Specification |
|---|---|
| Thickness | 40 mm standard; 25–60 mm on request |
| Panel size | 500 x 550 mm standard; custom cut to your drawing |
| Slot width | 0.1–4.0 mm slotted; tapered option |
| Slot tolerance | ±0.03 mm on slot width |
| Open area | 20–38 % depending on slot width |
| Hardness | Shore A 85 (75–95 available) |
| Compound | Hydrolysis-resistant wear grade polyurethane |
| Density | 1.10–1.15 g/cm³ |
| Tensile strength | ≥ 30 MPa |
| Tear strength | ≥ 80 kN/m |
| Abrasion (DIN 53516) | ≤ 40 mm³ |
| Rebound resilience | ≥ 40 % |
| Service temperature | −30 °C to +80 °C |
| Fixing | Bolt-through, pin and sleeve, or rail clamp |
Send the product specification, including any iron or staining limits, along with cut point, tonnage and machine drawing. Where contamination is contractual, we will confirm the construction in writing rather than leave it to an assumption.