Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
Fine sand loss does not announce itself. There is no breakdown, nothing visibly breaks, and nobody gets called out at night. There is just a settling pond that fills up faster than it used to, a product that slowly drifts coarser than the specification, and a dredging bill that arrives once a year and gets paid without comment.
If any of that sounds familiar, the slot is the first thing worth measuring.
Where 0.3 mm sits in practice. For most washed concrete and plaster sands, 0.3 mm is the working point at which the fine end of the product is retained without the deck being so tight that it blinds. Going finer retains more sand but gives up drainage; going coarser drains better and sells less. The decision belongs to your gradation, not to a rule of thumb.
Tolerance is what makes 0.3 mm mean anything. A panel advertised at 0.3 mm that is actually 0.45 mm on average is not a 0.3 mm panel. Slots are moulded from a machined tool and held to ±0.03 mm, so every slot on the panel — and every panel in the batch — separates at the size you specified.
Taper keeps that slot open. At this width, blinding is driven by surface tension as much as by particle size. The slot opens through the panel thickness, giving the water and the grain a diverging path out, which is what keeps the drainage rate stable through a shift instead of falling away by mid-morning.
Check the slot before changing anything else. Before buying another cyclone or enlarging the pond, measure the slot width on the panels in service. Worn slots look fine and run fine; they just quietly pass material you paid to mine.
Where it runsWash plants losing fine sand to settling ponds, plants with a product drifting coarse against specification, plaster and concrete sand lines, and upgrading aging plants where the panel standard predates current product requirements.
Technical data| Item | Specification |
|---|---|
| Thickness | 40 mm standard; 25–60 mm on request |
| Panel size | 500 x 550 mm standard; custom cut to your drawing |
| Slot width | 0.1–4.0 mm slotted; tapered option |
| Slot tolerance | ±0.03 mm on slot width |
| Open area | 20–38 % depending on slot width |
| Hardness | Shore A 85 (75–95 available) |
| Compound | Hydrolysis-resistant wear grade polyurethane |
| Density | 1.10–1.15 g/cm³ |
| Tensile strength | ≥ 30 MPa |
| Tear strength | ≥ 80 kN/m |
| Abrasion (DIN 53516) | ≤ 40 mm³ |
| Rebound resilience | ≥ 40 % |
| Service temperature | −30 °C to +80 °C |
| Fixing | Bolt-through, pin and sleeve, or rail clamp |
Send the product gradation you are required to hold, the slot width in service now, and the machine drawing. If you can also send the fines content of the wash water, that is the fastest way to see how much is actually being lost.
FAQWhat is your MOQ and lead time?
MOQ is 10 pcs. Standard lead time is 15 days, and standard mold making takes 10 days.
Will a finer slot blind faster?
Yes, marginally, and that is the trade-off. Tapered slots largely offset it, which is why we specify the taper rather than opening the slot back up to buy drainage.
How do I measure whether my current slots are worn?
A feeler gauge across several panels tells you in five minutes. If the measured slot reads more than about 0.1 mm wide of what was ordered, the panels are costing you sand.