Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
Fine sand recovery units run continuously in water, often with alkaline wash water and flocculant residue, which is exactly where standard polyurethane starts to soften. This sheet uses a hydrolysis resistant polyether based polyurethane so the liner keeps its hardness and thickness after long immersion.
The polyether based formulation resists water attack and keeps tensile strength in continuous immersion, avoiding the surface softening and swelling that shortens the life of ester based sheets.
The liner stays stable across a pH range of 4 to 11, covering the alkaline conditions created by cement wash water, flocculant dosing and recycled process water.
At 10 mm the sheet fits recovery unit side walls and under-pan areas where thicker boards will not clear the moving parts, while still giving a long wear life on fine sand.
| Sheet Thickness | 6 / 8 / 10 / 12 mm |
| Hardness | 80 - 90 Shore A |
| PH Range | 4 - 11 |
| Water Absorption | Below 1.5 percent, 24 h immersion |
| Fixing Method | Bolt, clamp strip or adhesive |
| Working Temperature | -30 to 80 deg C |
Hydrolysis resistance is verified in house with a 30 day immersion test at 60 deg C before a formulation is released to production, so the sheet you repeat order behaves the same as the first delivery.
Contact us with your drawing, sample or working condition. We will confirm sheet size, thickness, hardness and fixing method, then quote factory-direct wholesale pricing within 24 hours.