Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
Most wash plants do not choose their screen panels. They inherit them from whatever machine was bought, run it until the media is finished, and then discover that the replacement is either expensive, slow, or not quite the part that came off. That is the point at which a lot of plants start considering replacing the whole machine, and almost always unnecessarily.
Sand washers of any make whose original media is worn out, unavailable or over-priced, particularly plants that have been operating long enough that drawings no longer match the machine on site.
Technical data| Item | Specification |
|---|---|
| Thickness | 40 mm standard; 25–60 mm on request |
| Panel size | 500 x 550 mm standard; custom cut to your drawing |
| Slot width | 0.1–4.0 mm slotted; tapered option |
| Slot tolerance | ±0.03 mm on slot width |
| Open area | 20–38 % depending on slot width |
| Hardness | Shore A 85 (75–95 available) |
| Compound | Hydrolysis-resistant wear grade polyurethane |
| Density | 1.10–1.15 g/cm³ |
| Tensile strength | ≥ 30 MPa |
| Tear strength | ≥ 80 kN/m |
| Abrasion (DIN 53516) | ≤ 40 mm³ |
| Rebound resilience | ≥ 40 % |
| Service temperature | −30 °C to +80 °C |
| Fixing | Bolt-through, pin and sleeve, or rail clamp |
Send one worn panel, a photo of the deck, or a drawing with fixing centres. Tell us what you did not like about the previous set — wear life, blinding, fine sand loss — because that is the part worth changing on the replacement.