Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
The cost of a screen panel is rarely the panel. It is the labour around it, the downtime while it is changed, and the stock you have to hold to be ready for both. A modular deck addresses all three, which is why most wash plants end up specifying modules whether or not the original machine did.
One size, many positions. Standard modules in 500 x 550 mm, 305 x 610 mm, 500 x 500 mm and 600 x 600 mm keep the number of distinct parts on a deck low. Fewer part numbers means fewer spares to hold, and fewer chances of the wrong panel arriving on a Friday afternoon.
Replace what is worn, keep what is not. Wear is never even across a deck — feed zones and impacts points go first. With bolt-together modules, that section is lifted out and the remaining panels stay in service, rather than the whole set being retired on the weakest piece.
Sealed joints between modules. The weakness of any modular deck is the seam, because a gap between panels is where fine sand escapes and where slurry works underneath. Panels are moulded with matched edges and bolted tight to the frame so the seam stays closed under vibration.
Standard module, non-standard machine. A modular approach does not require a machine designed for it. We lay out the module grid against your existing deck, so you get standard replaceable parts on equipment that was never built around them.
Where it runs
Sand washer decks where uneven wear has been making full sets uneconomic, plants wanting to reduce spares inventory, and machines being re-decked to accept standard modules for the first time.
Technical data
| Item | Specification |
|---|---|
| Thickness | 40 mm standard; 25–60 mm on request |
| Panel size | 500 x 550 mm standard; custom cut to your drawing |
| Slot width | 0.1–4.0 mm slotted; tapered option |
| Slot tolerance | ±0.03 mm on slot width |
| Open area | 20–38 % depending on slot width |
| Hardness | Shore A 85 (75–95 available) |
| Compound | Hydrolysis-resistant wear grade polyurethane |
| Density | 1.10–1.15 g/cm³ |
| Tensile strength | ≥ 30 MPa |
| Tear strength | ≥ 80 kN/m |
| Abrasion (DIN 53516) | ≤ 40 mm³ |
| Rebound resilience | ≥ 40 % |
| Service temperature | −30 °C to +80 °C |
| Fixing | Bolt-through, pin and sleeve, or rail clamp |
Ordering
Send the deck drawing with the fixing layout and the material flow direction. We return a module layout drawing showing how many panels, which sizes, and where any cut panels sit before production starts.