Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
Custom Cut Polyurethane Conveyor Skirt Board Dust Sealing Strip 100mm Wide 85 Shore A
The skirt board is the flexible sealing strip that runs along the edge of a conveyor loading zone. It closes the gap between the belt and the chute wall so dust, fines and spillage stay on the belt instead of escaping into the plant.
Cast polyurethane holds its shape under the pressure of the belt while still flexing with belt travel. It resists cutting from sharp aggregate and keeps a consistent sealing lip far longer than soft rubber strip, so housekeeping load and product loss both drop.
Every loading zone is different, so the strip is produced to your length, width, thickness and hardness. We can supply plain strip for clamping, drilled strip for bolt fixing or a pre-bent section that follows the chute contour. Small trial lengths are welcome before a full order.
Clamp the strip between the chute wall and a retaining plate, leave a light contact with the belt and check tension after the first shift. Strips are supplied in continuous lengths so there are fewer joints and fewer leak paths.
| Item | Value |
|---|---|
| Material | Cast Polyurethane Elastomer |
| Hardness | Shore A 60-90 (custom) |
| Strip Width | 50-300 mm (custom) |
| Strip Thickness | 5-25 mm (custom) |
| Length | Made to your transfer point length |
| Colour | Yellow, red, black or custom |
| Service | Cut to size, drilled, pre-bent section |
| Application | Conveyor loading zone, chute lip, hopper outlet |
Tell us the belt width, the gap to be sealed and the material being handled, and we will quote the matching strip profile and hardness.