Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
Wear Resistant Diamond Groove Polyurethane Pulley Lagging Sheet 12mm Cold Bond
Lagging is the friction layer bonded to a drive pulley. Without it the belt slips, the pulley shell wears through and the drive motor works harder than it should. This polyurethane lagging sheet restores grip and protects the shell at the same time.
The raised diamond pattern channels water and fines away from the contact patch, so the belt keeps traction even on wet, dirty or clay coated pulley faces. Drainage grooves also stop material from packing into the lagging and lifting the belt off the surface.
The sheet is supplied with a buffed, solvent cleaned bonding face and can be fitted with two-part cold vulcanising adhesive. No press and no hot splicing equipment are needed, so a pulley can be re-lagged during a normal shutdown window. We also supply the sheet with a countersunk bolt pattern if you prefer mechanical fixing.
12 mm suits most medium duty drives, 15 mm and 20 mm are used where the pulley is worn or the wrap angle is small. Tell us the pulley diameter and belt tension and we will recommend a sheet thickness and groove depth.
| Item | Value |
|---|---|
| Material | Cast Polyurethane Elastomer |
| Hardness | Shore A 70-85 (custom) |
| Sheet Thickness | 8 / 10 / 12 / 15 / 20 mm |
| Groove Pattern | Diamond, plain or herringbone |
| Sheet Size | Cut to pulley circumference and face width |
| Bonding | Cold vulcanising adhesive or bolted |
| Tensile Strength | 35 MPa minimum |
| Application | Drive pulley, bend pulley, head pulley |
Send the pulley diameter, face width and belt specification, and we will cut the sheet to size and advise on adhesive quantity.