Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
Cast Polyurethane Slurry Pump Volute Liner Corrosion Resistant Custom Bore Heavy Duty
The volute liner is the pump casing insert that carries the abrasive slurry at its highest velocity. When it wears, the internal profile opens up, discharge pressure falls and the impeller starts to run off its best efficiency point. A cast polyurethane liner holds that profile far longer than mild steel in fine abrasive duty.
In slurries with fine sharp solids but limited large impact, cast polyurethane outlasts metal liners several times over. It also shrugs off mild acid and alkaline process water, and because it is a poor conductor of heat it does not build up the same surface temperature as steel in dry running conditions.
We cast single piece and split case liners from your pump model, drawing or worn sample. Bore diameter, cutwater position, flange faces and bolt hole pattern are all reproduced to the original profile so hydraulic performance is preserved. OEM and ODM work is standard for us.
Check that the liner seats flat on the casing and that the cutwater clearance to the impeller is within the pump maker's tolerance before you torque the bolts. For high impact duties we can supply a thicker section or a steel backed version.
| Item | Value |
|---|---|
| Material | Cast Polyurethane Elastomer |
| Hardness | Shore A 80-95 (custom) |
| Construction | Single piece or split case |
| Bore Size | 2-12 inch, cast to pump model |
| Wall Thickness | 15-60 mm (custom) |
| Working Temperature | -20 to 70 C |
| Service | OEM and ODM to drawing or worn sample |
| Application | Slurry pump, sand pump, tailings pump casing |
Share the pump model, bore size and slurry description, and we will confirm the liner profile, hardness and expected wear life.