Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
Polyurethane Lined Steel Pipe Abrasion Resistant Tailings Delivery Custom Diameter 8 Inch
A steel pipe carries the pressure, the polyurethane lining takes the wear. That combination gives you a tailings or slurry line that keeps its full wall thickness at the steel, while the abrasive solids slide over a smooth, resilient inner surface instead of grinding the pipe bore.
The lined bore is smoother than bare steel and does not scale up with rust or mineral deposit, so the friction loss stays close to the original design value. Operators can often hold the same flow rate with less pump head, and the line does not need the frequent pigging that unlined steel demands.
We bond the PU lining to your pipe, then finish the ends with fixed or loose flanges, bends, tees and reducers so the spools drop straight into your existing line. Diameter, lining thickness, flange standard and spool length are all built to your layout drawing. Lined bends and lined fittings can be supplied with the straight runs.
Keep the lined face protected during handling, use the gasket thickness allowed for in the flange design and avoid welding close to the lining. Spools are supplied with end caps so the bore arrives clean.
| Item | Value |
|---|---|
| Structure | Carbon steel pipe with bonded PU lining |
| Lining Material | Cast Polyurethane Elastomer |
| Lining Hardness | Shore A 80-95 (custom) |
| Lining Thickness | 3-15 mm (custom) |
| Pipe Size | 2-24 inch (custom) |
| End Connection | Fixed or loose flange to your standard |
| Fittings | Lined bends, tees and reducers available |
| Application | Tailings line, slurry transport, ash and lime slurry |
Send the pipe diameter, spool lengths and flange standard, and we will quote the lined spools and fittings as a complete set.