Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
Custom Cast Polyurethane Blind Plate 1000x1000mm Screen Deck Blanking Panel for Modular Media
This plate closes off a section of modular screen media where material has to travel across the deck without dropping through. It is poured as one solid casting at 1000 x 1000 mm, and the bolt hole layout is copied from the aperture panels already fitted to the machine, so a deck can be re-profiled for a new cut point inside a single shutdown. No welding, no adapter frames, no redrilling of the cross members.
The pre-polymer is degassed before pouring and the filled mould is cured in a temperature controlled oven, which holds hardness within +/- 3 Shore A across the whole face. Every moulded edge carries a 3 mm radius so that bolt torque does not start a stress crack, and inserts are cast in place rather than glued afterwards.
Every plate is made to drawing: outline size, bolt hole diameter and pitch, countersink depth, edge chamfer, lifting lugs, hardness and colour. Send a site sketch, a worn panel or a photo with a tape measure and the drawing is returned for approval before casting starts.
Plates that match an existing mould are shipped in 7 to 15 days. A new mould takes 12 to 15 days to build, after which repeat orders run from finished stock plate.
| Material | Cast polyurethane elastomer, MDI pre-polymer system |
| Hardness | 85 +/- 3 Shore A (80A / 90A / 95A on request) |
| Thickness | 10 / 15 / 20 / 25 / 30 mm |
| Plate Size | 1000 x 1000 mm standard, custom up to 2000 x 1200 mm |
| Dimensional Tolerance | +/- 1.0 mm length and width, +/- 0.5 mm thickness |
| Tensile Strength | Not less than 45 MPa |
| Tear Strength | Not less than 90 kN/m |
| Abrasion Loss | Not more than 60 mm3, DIN 53516 |
| Density | 1.10 - 1.15 g/cm3 |
| Service Temperature | -30 C to +80 C |
| Colour | Natural amber, black or matched to sample |
| Fixing Method | Bolt-through, countersunk insert or steel backed |
| Certification | ISO 9001, ISO 14001, ISO 45001 |
Packed in plywood cases with moisture barrier film and steel strapping. Full dimensional report and material batch certificate supplied with each shipment.