Quick Link
Quick Contact
Address
No.367 Beijing Road, Longquanyi District, Chengdu, China
Tel
86--13981727059
Our Newsletter
Subscribe to our newsletter for discounts and more.
Polyurethane Blind Board 20mm Thick Anti Stick Chute Liner Plate Custom Cut to Drawing
Wet sticky material is the usual reason a transfer chute plugs. This board gives the chute wall a smooth, low friction face that material slides over instead of smearing onto. It is supplied as a solid blind board, meaning no perforations at all, and it is cut to the exact outline of the panel it replaces so the liner drops straight into the existing bolt pattern.
Perforated or slotted liners let fines migrate behind the plate, and once that happens the bolts work loose and the liner starts to buckle. A fully blind board seals the wall, keeps the substrate dry and spreads the impact load across the full panel area rather than around hole edges.
The 20 mm section keeps enough stiffness to bridge support spacing of up to 600 mm without a steel backing plate, while the elastomer face recovers from impact instead of denting. Compared with mild steel liners of the same thickness, the board is roughly one eighth of the weight, which makes single person handling realistic during maintenance.
Send the outline drawing, hole positions and thickness. If only a worn board is available, we will reverse-draw it and return a dimensioned sketch for your approval before cutting.
| Material | Cast polyurethane elastomer, MDI pre-polymer system |
| Hardness | 85 +/- 3 Shore A (80A / 90A / 95A on request) |
| Thickness | 10 / 15 / 20 / 25 / 30 mm |
| Plate Size | 1000 x 1000 mm standard, custom up to 2000 x 1200 mm |
| Dimensional Tolerance | +/- 1.0 mm length and width, +/- 0.5 mm thickness |
| Tensile Strength | Not less than 45 MPa |
| Tear Strength | Not less than 90 kN/m |
| Abrasion Loss | Not more than 60 mm3, DIN 53516 |
| Density | 1.10 - 1.15 g/cm3 |
| Service Temperature | -30 C to +80 C |
| Colour | Natural amber, black or matched to sample |
| Fixing Method | Bolt-through, countersunk insert or steel backed |
| Certification | ISO 9001, ISO 14001, ISO 45001 |
Boards are stacked flat on plywood pallets, interleaved with film, and steel strapped. Cut list and material certificate travel with the shipment.