Polyurethane 305x305mm Modular Screen Deck Blanking Mat Custom Formulated

Place of Origin: China
Certification: ISO 9001, ISO 14001, ISO 45001
Model Number: PU-BS-305-M
Minimum Order Quantity: 1 Piece
Packaging Details: Plywood case with moisture barrier film, foam separators and steel strapping, export grade
Delivery Time: 7-15 days for existing mould sizes, 20-25 days for new tooling
Payment Terms: T/T,L/C,Western Union
Supply Ability: 2000 Pieces per Month
Inquiry Now
Get A Quote
Specifications
Highlight Features

Polyurethane 305x305mm Modular Screen Deck

,

Polyurethane Modular Screen Deck

Material:
Cast Polyurethane Elastomer
Hardness:
85 Shore A (80A / 90A / 95A Available)
Thickness:
10 / 15 / 20 Mm
Size:
305 X 305 Mm
Density:
1.10 - 1.15 G/cm3
Tensile Strength:
Not Less Than 45 MPa
Tear Strength:
Not Less Than 90 KN/m
Abrasion Loss:
Not More Than 60 Mm3 (DIN 53516)
Service Temperature:
-30 C To +80 C
Colour:
Natural Amber Or Black, Custom On Request
Customisation:
Made To Drawing: Size, Bolt Pattern, Hardness, Edge Profile
Product Description

305 x 305 mm Modular Polyurethane Blind Segment

Polyurethane Blind Segment 305x305mm Modular Screen Deck Blanking Mat Custom Formulated

 

Modular decks are designed so that a single panel can be swapped by hand. This blind segment uses that same logic: it is a solid polyurethane panel, 305 x 305 mm, with the standard pin or rail fixing of the deck it belongs to. One aperture panel out, one blind segment in, and screening area drops exactly one module without touching the frame.

Designed for Wet and Alkaline Circuits

Constant water contact and high pH are the two conditions that shorten polyurethane life. This compound is formulated on a polyether pre-polymer with a hydrolysis stabiliser, and it keeps its hardness after long immersion instead of turning soft and swelling. Segments are also available in a 95 Shore A grade for high pressure spray zones.

Deck Matching

  • Pin fixing, rail fixing and bolt-through variants
  • Segment edge profile matched to the neighbouring media panel so the surface is continuous
  • Optional moulded lifting nib for quick removal
  • Thickness matched to the existing panel so no shimming is needed

How a Deck Gets Re-Profiled

Blind segments are normally used to trim the effective screening length when a plant changes cut point, and to close the outer modules that carry the highest wear. Because each segment is a separate item, the deck can be tuned module by module and returned to full open area later if the duty changes back.

Custom Formulation

Hardness, colour and hydrolysis package are selected against your slurry analysis. Segments can be marked with a moulded number on the underside so operators can identify grade on site.

Technical Specification

Material Cast polyurethane elastomer, MDI pre-polymer system
Hardness 85 +/- 3 Shore A (80A / 90A / 95A on request)
Thickness 10 / 15 / 20 / 25 / 30 mm
Plate Size 1000 x 1000 mm standard, custom up to 2000 x 1200 mm
Dimensional Tolerance +/- 1.0 mm length and width, +/- 0.5 mm thickness
Tensile Strength Not less than 45 MPa
Tear Strength Not less than 90 kN/m
Abrasion Loss Not more than 60 mm3, DIN 53516
Density 1.10 - 1.15 g/cm3
Service Temperature -30 C to +80 C
Colour Natural amber, black or matched to sample
Fixing Method Bolt-through, countersunk insert or steel backed
Certification ISO 9001, ISO 14001, ISO 45001

Segments are boxed in counted layers with film between each panel; plywood case is steel strapped and palletised.

Related Products
Send an Inquiry